Full vehicle wrap with a large bold diagonal color split. The front cabin and hood are the primary brand color from the logo. A massive clean diagonal edge sweeps from the top-front down to the rear-bottom, creating a large dark charcoal geometric panel covering the rear two-thirds of the side. Scattered across the dark panel are large irregular hexagonal and polygon shapes in two tones — one slightly lighter than the panel, one in a warm accent color from the logo — creating a modern geometric texture. Company name in large bold white sans-serif centered on the dark panel. Services listed in a clean white column below the company name. Phone number large on the right side of the dark panel. Website small below phone. Tagline in italic at the bottom edge. Company: [YOUR COMPANY], Tagline: [YOUR TAGLINE], Services: [SERVICE 1], [SERVICE 2], [SERVICE 3], [SERVICE 4], Phone: [YOUR PHONE], Website: [YOUR WEBSITE].

Full vehicle wrap with an aggressive racing-inspired design. The vehicle base is deep matte black. Three bold parallel diagonal stripes in the primary logo color run from the front lower bumper at a 25-degree upward angle across the full length of both side panels, ending at the rear upper corner — creating strong forward motion. Between the stripes, the company name is displayed in massive bold condensed white letters spanning the full door length. Below the company name, a clean horizontal band in a secondary logo color contains the services list in white text on the left and the phone number large on the right. The hood features two parallel stripes matching the side design. The rear doors show the logo centered with phone and website below. Company: [YOUR COMPANY], Services: [SERVICE 1], [SERVICE 2], [SERVICE 3], Phone: [YOUR PHONE], Website: [YOUR WEBSITE].

Full vehicle wrap with a dynamic angular chevron design. The lower 45% of the vehicle sides is a solid deep color block in the primary logo color, with a sharp pointed chevron edge at the top — the chevron point faces forward, creating an aggressive arrow-like forward-motion effect. The upper body remains the original vehicle color. Inside the lower color block, the company name is in large bold white letters on the front door. A thin bright accent stripe in a secondary logo color runs along the top edge of the color block from front bumper to rear. On the rear panel, the logo is centered large with phone number and website below it in white. The hood has a matching chevron shape pointing toward the front grille. Company: [YOUR COMPANY], Phone: [YOUR PHONE], Website: [YOUR WEBSITE], Tagline: [YOUR TAGLINE].

Full vehicle wrap with a flowing swoosh design. The entire vehicle body is wrapped in the primary dark logo color. A large bold swoosh shape in the secondary logo color sweeps from the front lower bumper in a wide upward curve, peaks at the mid-door height, then curves back down toward the rear — creating a dynamic wave across the full side panel. Inside the swoosh area, a subtle geometric diamond or hexagonal repeat pattern is printed in a slightly lighter shade for texture depth. The company name is in very large bold white letters above the swoosh on the front door. Below the swoosh, services are listed in clean white text. Phone number is large and bold on the rear section. The logo is placed inside the swoosh shape on the front door. Hood features the swoosh continuing from the side. Company: [YOUR COMPANY], Services: [SERVICE 1], [SERVICE 2], [SERVICE 3], [SERVICE 4], Phone: [YOUR PHONE], Website: [YOUR WEBSITE].

Full vehicle wrap with a bold tri-color block layout. The vehicle side is divided into three distinct vertical zones by two sharp diagonal cuts: the front zone (front bumper to A-pillar) is the primary logo color; the large center zone (A-pillar to C-pillar, covering both doors) is deep charcoal or dark navy; the rear zone (C-pillar to rear bumper) is the secondary logo color. The company logo is displayed very large — hero size — centered in the middle charcoal zone, taking up 60% of the door height. The company name in bold white is directly below the logo. A vertical list of services in small white text sits to the left of the logo. Phone number in large bold white is in the rear color zone. A thin bright accent line in a third logo color traces all the diagonal cut edges, making the transitions crisp and premium. Company: [YOUR COMPANY], Services: [SERVICE 1], [SERVICE 2], [SERVICE 3], Phone: [YOUR PHONE], Website: [YOUR WEBSITE].

Design a premium backlit lightbox shop sign mounted on a flat wall. The sign has a deep aluminum frame with rounded corners. The face is a frosted acrylic panel, evenly backlit with warm white LEDs creating a soft glow around the edges. The company logo is placed large and centered on the left half of the sign. To the right of the logo, the company name is in large bold modern sans-serif white letters. Below the company name, the tagline is in smaller italic text. At the bottom strip, business hours and phone number are displayed in clean small white text on a slightly darker band. The overall look is premium, clean, and professional — like a high-end retail or restaurant sign. Evening scene with the sign glowing against a dark exterior wall. Company: [YOUR COMPANY], Tagline: [YOUR TAGLINE], Phone: [YOUR PHONE], Hours: Mon-Sat 9am-8pm.

Design a large outdoor highway billboard. The billboard structure is a standard wide rectangular panel on two steel poles. The background is a bold solid color from the logo — deep and saturated. On the left third, the company logo is displayed very large, taking up the full height of the billboard. On the right two-thirds, the company name is in massive bold white condensed letters — the largest element. Below the company name, a short punchy headline in a secondary color. Below that, the phone number in very large bold white digits — readable from 100 meters. Website URL in smaller white text at the bottom. A thin bright accent stripe runs along the bottom edge of the billboard panel. The scene shows the billboard on a highway with a clear sky background, daytime. Company: [YOUR COMPANY], Headline: [YOUR HEADLINE], Phone: [YOUR PHONE], Website: [YOUR WEBSITE].

Design a premium 3D channel letter sign mounted on a dark exterior wall. The letters are individually fabricated from brushed stainless steel with a deep return depth of 10cm, giving them strong 3D shadow depth. Each letter is front-lit with the primary logo color LEDs, creating a vivid colored glow on the face. Behind each letter, a warm white halo glow radiates onto the dark wall — the halo effect is soft and wide, about 15cm radius. The company logo symbol is mounted to the left of the letters as a separate 3D fabricated element in matching brushed metal. Below the main company name letters, a thinner row of smaller acrylic letters shows the tagline in white. The scene is a night/evening shot — the dark wall makes the glowing letters pop dramatically. The overall look is luxury, premium, and architectural. Company: [YOUR COMPANY], Tagline: [YOUR TAGLINE].

Design a modern shopfront facade using ACP (Aluminum Composite Panel) cladding. The entire shopfront fascia above the entrance is clad in large ACP panels in the primary brand color from the logo. The panels have a clean flat finish with subtle shadow lines at the joints. Mounted on the ACP fascia are large 3D raised acrylic letters spelling the company name — the letters are in white with a slight depth/shadow. The company logo is mounted as a separate raised element to the left of the name. Below the fascia, the shop entrance has a glass door with the phone number and website etched or vinyl-applied in white. A thin LED strip light runs along the bottom edge of the ACP fascia, illuminating the entrance area. The scene is daytime, street-level view showing the full shopfront. Company: [YOUR COMPANY], Phone: [YOUR PHONE], Website: [YOUR WEBSITE].

Design a tall freestanding pylon/totem sign for a business entrance or parking area. The sign is a slim vertical rectangular cabinet, approximately 3 meters tall and 80cm wide, mounted on a single steel pole base. The cabinet is divided into three horizontal sections: the top section has the company logo on a dark background with internal LED illumination; the middle section (largest) shows the company name in large bold white letters on the primary brand color background, also internally lit; the bottom section shows the phone number and website on a contrasting dark panel. The cabinet has clean aluminum edge trim. The sign is shown in a parking lot or business entrance setting, evening scene with the sign glowing. The overall look is corporate, professional, and highly visible from a distance. Company: [YOUR COMPANY], Phone: [YOUR PHONE], Website: [YOUR WEBSITE].

Design a premium corporate reception area. The reception desk is a curved or L-shaped counter fabricated from dark wood veneer panels with a white quartz or solid surface top. The front face of the desk has the company name in large 3D raised stainless steel letters, backlit with a warm LED halo glow. Behind the desk, the full wall is a feature wall: the upper two-thirds is clad in large format dark ACP panels with a subtle brushed texture; mounted on the wall is the company logo in very large 3D fabricated letters/symbol in brushed gold or chrome finish, with a soft halo glow behind it. Below the logo, the company tagline in smaller raised letters. The floor is polished concrete or large format tiles. Ambient lighting is warm and professional. The scene is a photorealistic interior render showing the full reception area. Company: [YOUR COMPANY], Tagline: [YOUR TAGLINE].

Design a 3x3 meter trade show exhibition booth. The back wall is a full-width tension fabric display with a bold graphic: the primary brand color fills the background, the company logo is very large and centered in the upper half, and the company name in massive white letters below it. On the left side panel, a vertical banner shows services list with icons. On the right side panel, a vertical banner shows contact info — phone, website, social media. The booth has a custom fabricated counter/desk at the front center in matching brand colors with the logo on the front face. Overhead, a custom LED light box frame illuminates the booth. The floor has a branded carpet or vinyl floor graphic. The scene is a busy trade show hall, photorealistic render showing the full booth from a slight angle. Company: [YOUR COMPANY], Services: [SERVICE 1], [SERVICE 2], [SERVICE 3], Phone: [YOUR PHONE], Website: [YOUR WEBSITE].

Design a corporate building entrance facade branding installation. The building is a modern multi-story office building. The ground floor entrance area has a large ACP panel fascia above the glass entrance doors, clad in the primary brand color. Mounted on this fascia are very large 3D fabricated letters spelling the company name in brushed stainless steel, with a subtle shadow depth. The company logo symbol is mounted separately to the left, also in 3D brushed metal. On the glass entrance doors, the company name and floor directory are applied in frosted vinyl. On the exterior wall to the right of the entrance, a large format printed ACP panel shows the company tagline and contact info. LED strip lighting runs along the top and bottom edges of the fascia. The scene is a photorealistic exterior render, daytime, showing the full building entrance. Company: [YOUR COMPANY], Tagline: [YOUR TAGLINE], Phone: [YOUR PHONE].

Design a complete retail shop interior branding installation. The shop is a medium-sized retail space. The back wall behind the main display shelves is a full-height feature wall: the lower half is clad in ACP panels in the primary brand color; the upper half is a large format printed graphic showing the company logo very large with a subtle pattern background. On the left wall, a large printed vinyl mural shows the company tagline and brand imagery. The shop counter/checkout desk is custom fabricated in matching brand colors with the logo on the front face in 3D raised letters. Overhead hanging signs show product categories. The floor has a branded entrance mat. All signage uses consistent brand colors and typography. The scene is a photorealistic interior render showing the full shop from the entrance. Company: [YOUR COMPANY], Tagline: [YOUR TAGLINE].

Design a construction site hoarding / outdoor site branding installation. The hoarding is a long continuous fence panel system made of steel or plywood, approximately 2.4 meters tall, running along the full length of a construction site boundary. The panels are printed with a bold full-color graphic: the background is the primary brand color; a large diagonal graphic element in the secondary brand color sweeps across the panels creating visual flow. The company logo is displayed very large, repeated every 4-5 meters along the hoarding. The company name in massive bold white letters runs across the center of the panels. Below the name, the tagline and services are listed. Contact info — phone and website — appears prominently. Safety notices and project information are on a separate lower band. The scene is a street-level view showing the full hoarding along a busy road, daytime. Company: [YOUR COMPANY], Tagline: [YOUR TAGLINE], Services: [SERVICE 1], [SERVICE 2], Phone: [YOUR PHONE], Website: [YOUR WEBSITE].